Why the LAN connection doesn't work
The interface is off on the Explorer. The cable is not properly connected. The cable type or connector type is not correct. Your IP address settings may be incorrect.
Enable the interface by entering the display menu system and selecting SETTINGS > INTERFACES > LAN > ON, or by accessing the Web interface and selecting SETTINGS > interfaces > LAN > Enabled. Connect the cable. For information on the correct type of connector and cable, refer to LAN interface on page 130 of the user manual. You also need to make sure that your LAN interface on your computer is set to DHCP. For information on how to do this, please refer to the documentation that came with your computer.