Most Popular
Recently Added
Recently Updated

Update your BGAN 510/710

  1. Download the Firmware upgrade.

  2. When the upload is done, the terminal will reboot. Select the address again and verify that the software version is listed

  3. Click Support.

  4. Click Update Software.

  5. Click Update software.

  6. Browse to the new software version and click Open. The software file has the extension “.tiif”. The EXPLORER 510 will upload the file and start updating the software.

Note, that during this phase, the Status LED on the terminal will be flashing in blue colour.

Important! – Do not switch off the terminal while the Status LED is flashing in blue colour!!
The EXPLORER 510 now reboots and starts up with the new software version.

Status LED will turn green when upgrade is successful.

Properties ID: 000257   Views: 539   Updated: 2 years ago
Filed under: